Ansell AlphaTec 87-108 Black Heavy Duty Latex Gauntlets Gloves 24inch Extra Long

Ansell AlphaTec 87-108 Black Heavy Duty Latex Gauntlets Gloves 24inch Extra Long

Ansell AlphaTec 87-108 Black Heavy Duty Latex Gauntlets Gloves 24inch Extra Long

Ansell AlphaTec 87-108 Black Heavy Duty Latex Gauntlets Gloves 24inch Extra Long. Heavy duty chemical protection glove.

Beaded cuff for easy donning. 610 mm / 24 inches long glove length. Pure natural rubber glove with 1.5 mm / 59 mils thickness. A-F (F highest Cut Resistants). The material is subjected to abrasion by a sandpaper under a determined pressure.

The protection level is indicated on a scale of 1 to 4 depending on the number of turns required until a hole appears in the material. The higher the number is, the better the resistance to abrasion. The cut protection is tested.

A knife is passed over the glove material until it cuts through. The protection level is given by a number between 1 and 5, where 5 indicates the highest cut protection. If the material dulls the knife during this test, the cut test ISO 13997(TDM test) shall be performed instead, see point 5. The force required to tear the glove material apart is measured. The protection level is indicated by a number between 1 and 4, where 4 indicates the strongest material.

Based on the amount of force required to puncture the material with a tip. The protection function is indicated by a number between 1 and 4, where 4 indicates the strongest material. CUT RESISTANCE, TDM TEST ISO 13997. If the knife gets dull during the coup test, see point 2, this test shall be performed instead.

The result is given by a letter, A to F, where F indicates the highest level of protection. If any of these letters is given, this method determines the protection level instead of the coup test. Determination of resistance to cutting by sharp objects An alternative cut test recommended for cut protection gloves. Shall be used in EN388:2016 for cut protection gloves where the cut material dulls the cutting knife during testing. A knife cuts with constant speed but increasing force until breakthrough of the cut protection material. Level of protection is given in Newton, the force needed for cut through at 20mm cut length. EN ISO 374-1 Type A Code Letters. The chemicals break through the glove material at a molecular level.

The breakthrough time is here evaluated and the glove must withstand a breakthrough time of at least: Type A - 30 minutes (level 2) against minimum 6 test chemicals Type B - 30 minutes (level 2) against minimum 3 test chemicals Type C - 10 minutes (level 1) against minimum 1 test chemical. Great price and good service. We will make every effort to ensure that your order is received quickly and safely. Please be aware due to the UK leaving the EU any order being sent outside of the Uk will be subject to import duty an VAT at your local rate on receiving the goods. Authorised suppliers of Draper tools, Sealey Tools, Hilka Tools, Ansell Gloves, Hycote Spray Paint and various other tools and accessories.

This item is in the category "Business, Office & Industrial\Facility Maintenance & Safety\Personal Protective Equipment (PPE)\Work Gloves". The seller is "mccormicktools" and is located in this country: GB. This item can be shipped worldwide.


Ansell AlphaTec 87-108 Black Heavy Duty Latex Gauntlets Gloves 24inch Extra Long


Home    Archives    Contact Form    Privacy Policy Agreement    Terms of service